Homemade Mud Jacuzzi
-
- Posts: 70
- Joined: Thu Apr 16, 2009 7:10 am
Re: Homemade Mud Jacuzzi
I think a 330 Gallon Reconditioned IBC Tote might be a good idea. Someone else posted about using one.
- mscfmjkj
- Posts: 44
- Joined: Sun Apr 19, 2009 6:02 pm
- Location: FL
Re: Homemade Mud Jacuzzi
QSMud wrote:I think a 330 Gallon Reconditioned IBC Tote might be a good idea. Someone else posted about using one.
Interesting!
-
- Posts: 70
- Joined: Thu Apr 16, 2009 7:10 am
Re: Homemade Mud Jacuzzi
I remembered where I saw the photos: https://umd.net/farmcouple
Videos too.
Have you thought about your landlord visiting on short notice?
Videos too.
Have you thought about your landlord visiting on short notice?
- mscfmjkj
- Posts: 44
- Joined: Sun Apr 19, 2009 6:02 pm
- Location: FL
Re: Homemade Mud Jacuzzi
QSMud wrote:I remembered where I saw the photos: https://umd.net/farmcouple
Videos too.
Have you thought about your landlord visiting on short notice?
Well, it is Florida... so I guess I'd offer him a beer and invite him to hop on in?
- mudxdresser
- Posts: 344
- Joined: Sat Apr 18, 2009 5:05 pm
- Location: Austin, Texas
Re: Homemade Mud Jacuzzi
A 1/2 hp spa pump will circulate liquid clay but only if the fluid is not too thick. The problem is not getting it to circulate but the heat that builds up from the motor having to work twice as hard to pump something thicker than the water it is designed for. I have 1/2 hp motor rigged to circulate clay in a 5 gallon bucket to mix mud in and have had no trouble getting it to work as long as I put a high volume fan right beside the motor when it is running...
-
- Posts: 47
- Joined: Tue Jun 17, 2014 10:46 pm
Re: Homemade Mud Jacuzzi
also remember that obs board rots too I've seen paintball fields use obs board to build buildings. after a while somebody comes running through a wall and the field changes a bit. imagine that but a lot sooner cause obs board isn't as strong as plywood also why not just use cinderblocks and mortor I'm sure one can find cinder blocks cheap at a stone cutting facility
- mscfmjkj
- Posts: 44
- Joined: Sun Apr 19, 2009 6:02 pm
- Location: FL
Re: Homemade Mud Jacuzzi
STEP 1: Acquire IBC Tote - SUCCESS!
STEP 2: Remove top and prepare to fill with clay!!
STEP 2: Remove top and prepare to fill with clay!!
You do not have the required permissions to view the files attached to this post.
- mscfmjkj
- Posts: 44
- Joined: Sun Apr 19, 2009 6:02 pm
- Location: FL
Re: Homemade Mud Jacuzzi
STEP 2: Remove top - SUCCESS!
before I get carried away and start dumping in buckets of clay, I've got to give the interior a quick wash. Next I'm going to insert some pond liner for extra security (in case the plastic has worn any weak spots in its previous use). I've decided not to bother with a heating element. In 90-100+ degree weather I wouldn't want my clay pit heated anyway; and if it's 60s or below I have plenty else to keep me entertained indoors. As a backup, I might mix up a big pool of slime in the garage!
before I get carried away and start dumping in buckets of clay, I've got to give the interior a quick wash. Next I'm going to insert some pond liner for extra security (in case the plastic has worn any weak spots in its previous use). I've decided not to bother with a heating element. In 90-100+ degree weather I wouldn't want my clay pit heated anyway; and if it's 60s or below I have plenty else to keep me entertained indoors. As a backup, I might mix up a big pool of slime in the garage!
You do not have the required permissions to view the files attached to this post.
- Mynock
- Posts: 3044
- Joined: Thu Apr 16, 2009 2:29 am
- Location: PA
Re: Homemade Mud Jacuzzi
I wouldn't bother with the pond liner, if the plastic tub fails the liner would just rip too. It would be like trying to reinforce body armor with a Ziplock sandwich bag.
That being said though you're on the right track. If I remember correctly those totes are made from HDPE plastic, which is incredibly strong and flexible. I wouldn't hesitate to fill that up in my garage.
That being said though you're on the right track. If I remember correctly those totes are made from HDPE plastic, which is incredibly strong and flexible. I wouldn't hesitate to fill that up in my garage.
"Know thyself, know thy enemy. A thousand battles, a thousand victories."
--Sun Tzu
--Sun Tzu
- mscfmjkj
- Posts: 44
- Joined: Sun Apr 19, 2009 6:02 pm
- Location: FL
Re: Homemade Mud Jacuzzi
700lbs of bentonite clay: CHECK! (4 more bags not shown)
This extra high yield stuff is much finer than what I've seen before. It's a very fine powder - meaning mask & eye protection while mixing is a must! I have a feeling a little is gonna go a long way. I scooped out just 3 cups of dry powder and that soaked up nearly 2 gallons of water super fast. We'll see how much more it settles overnight.
Just another thought... my one complaint with bentonite is that it's not as tactile as some other clays. Bentonite swells up to be wonderfully smooth and gel-like, but it doesn't have elasticity or stickiness - it doesn't grab on to you. For some, that would be a positive, but I like thick, sticky, stretchy stuff! I've ordered a sample of sodium polyacrylamide (PAM in the industry), which is commonly used in agriculture. It can also be found as Slime Baff. Now here's some seriously sticky and stretchy slime!
I plan to experiment with combining PAM and bentonite. They may end up being immiscible, but wouldn't that be stellar if they mixed together to create something with the consistency like heavy, sticky, stretchy dough?!?
This extra high yield stuff is much finer than what I've seen before. It's a very fine powder - meaning mask & eye protection while mixing is a must! I have a feeling a little is gonna go a long way. I scooped out just 3 cups of dry powder and that soaked up nearly 2 gallons of water super fast. We'll see how much more it settles overnight.
Just another thought... my one complaint with bentonite is that it's not as tactile as some other clays. Bentonite swells up to be wonderfully smooth and gel-like, but it doesn't have elasticity or stickiness - it doesn't grab on to you. For some, that would be a positive, but I like thick, sticky, stretchy stuff! I've ordered a sample of sodium polyacrylamide (PAM in the industry), which is commonly used in agriculture. It can also be found as Slime Baff. Now here's some seriously sticky and stretchy slime!
I plan to experiment with combining PAM and bentonite. They may end up being immiscible, but wouldn't that be stellar if they mixed together to create something with the consistency like heavy, sticky, stretchy dough?!?
You do not have the required permissions to view the files attached to this post.
Return to “General Discussion”
Who is online
Users browsing this forum: No registered users and 2 guests